Sections Results

 

 

Introduction to Mechatronics (2020 Fall Term MECT-1220-H1602)5/12/2020 7:34:10 PM(replaces MECT-1211, MECT-1212, MECT-1213, MECT-1214, MECT-1215, and MECT-1216 together but does not equate to Automated System-Mecha (MECT (replaces MECT-1211, MECT-1212, MECT-1213, MECT-1214, MECT-1215, and MECT-1216 together but does not equate to either course separately) This course introduces industrial automation concepts such as AC/DC control systems, electronic sensors, pneumatics, material handling systems (robots), and mechanical drives. Computers and computer simulation software will be used throughout the course. Troubleshooting of mechanical problems, circuits, logic, and programs will be emphasized. Industrial technical terms and safety procedures will be taught. (8 contact hrs) South Campus.Mechanical & Process Tech SCUndergraduateAutomated System-Mecha (MECT)MECT-1220-H1602Introduction to Mechatronics MECT-1220-H16022020 Fall Term; T TH 6:00 PM - 9:55 PM8/17/2020 12:00:00 AM - 12/12/2020 12:00:00 AMVocational, DO NOT USE-Applied Tech6
Introduction to Mechatronics (2020 Fall Term MECT-1220-H1601)5/12/2020 7:34:10 PM(replaces MECT-1211, MECT-1212, MECT-1213, MECT-1214, MECT-1215, and MECT-1216 together but does not equate to Automated System-Mecha (MECT (replaces MECT-1211, MECT-1212, MECT-1213, MECT-1214, MECT-1215, and MECT-1216 together but does not equate to either course separately) This course introduces industrial automation concepts such as AC/DC control systems, electronic sensors, pneumatics, material handling systems (robots), and mechanical drives. Computers and computer simulation software will be used throughout the course. Troubleshooting of mechanical problems, circuits, logic, and programs will be emphasized. Industrial technical terms and safety procedures will be taught. (8 contact hrs) South Campus.Mechanical & Process Tech SCUndergraduateAutomated System-Mecha (MECT)MECT-1220-H1601Introduction to Mechatronics MECT-1220-H16012020 Fall Term; M W 8:00 AM - 11:55 AM8/17/2020 12:00:00 AM - 12/12/2020 12:00:00 AMVocational, DO NOT USE-Applied Tech6
PLC Basic Programming (2020 Fall Term MECT-2115-H1601)5/12/2020 7:34:10 PM(replaces MECT-2110 and MECT-2112 together but does not equate to either course separately PLC interaction with mechanical, electrical, and fluid power Automated System-Mecha (MECT (replaces MECT-2110 and MECT-2112 together but does not equate to either course separately) This course includes an introduction to PLC systems, basic relay logic is covered with reference to its PLC replacement, and an introduction to ladder logic programming techniques. PLC interaction with mechanical, electrical, and fluid power components and sensors. Troubleshooting of mechanical problems, circuits, logic and programs will be emphasized. (6 contact hrs) South Campus.Mechanical & Process Tech SCUndergraduateAutomated System-Mecha (MECT)MECT-2115-H1601PLC Basic Programming MECT-2115-H16012020 Fall Term; M W 6:00 PM - 8:55 PM8/17/2020 12:00:00 AM - 12/12/2020 12:00:00 AMVocational4
PLC Advanced Programming (2020 Fall Term MECT-2215-H1601)5/12/2020 7:34:10 PM(replaces MECT-2210 and MECT-2212 together but does not equate to either course separately Students will gain valuable real world experience in the Automated System-Mecha (MECT (replaces MECT-2210 and MECT-2212 together but does not equate to either course separately) This is a capstone course in the Automated Systems Technology (Mechatronics) program. Students will gain valuable real world experience in the control, maintenance, and simulation of automated processes, which utilize advanced manufacturing techniques. The physical system substations will include but are not limited to processes such as pick and place feeding, automatic gauging, part indexing, part sorting and queuing, robotic pick and place assembly, and part torquing. The software simulation of each substation will also be presented. (6 contact hrs) South Campus.Mechanical & Process Tech SCUndergraduateAutomated System-Mecha (MECT)MECT-2215-H1601PLC Advanced Programming MECT-2215-H16012020 Fall Term; M W 6:00 PM - 8:55 PM8/17/2020 12:00:00 AM - 12/12/2020 12:00:00 AMVocational4
PLC Basic Prog-Allen Bradley (2020 Fall Term MECT-2645-H1602)5/12/2020 7:34:10 PM(formerly MECT-2640 and MECT-2740) This course includes an introduction to PLC systems PLC interaction with mechanical, electrical, and fluid power Automated System-Mecha (MECT (formerly MECT-2640 and MECT-2740) This course includes an introduction to PLC systems, basic relay logic is covered with reference to its PLC replacement , and an introduction to ladder logic programming techniques. PLC interaction with mechanical, electrical, and fluid power components and sensors. Troubleshooting of mechanical problems, circuits, logic and programs will be emphasized. (6 contact hrs) South Campus.Mechanical & Process Tech SCUndergraduateAutomated System-Mecha (MECT)MECT-2645-H1602PLC Basic Prog-Allen Bradley MECT-2645-H16022020 Fall Term; T TH 12:00 PM - 2:55 PM8/17/2020 12:00:00 AM - 12/12/2020 12:00:00 AMVocational, DO NOT USE-Applied Tech4
Mechatronics Programming 2 (2016 Winter Term MECT-2112-CT011)4/4/2016 10:43:23 PMThis course is a continuation of MECT-2110 and provides the student with further knowledge This course is a continuation of MECT-2110 and provides the student with further knowledge required to create and edit basic programmable logic controller (PLC) programs, understand input-output (I/O) interfacing, and perform fundamental PLC troubleshooting procedures. (8 contact hrs per week for 8 wks) South Campus.Mechanical & Process Tech SCUndergraduateAutomated Systems-MechatronicsMECT-2112-CT011Mechatronics Programming 2 MECT-2112-CT0112016 Winter TermJ. WieczerzaT TH 1:00 PM - 5:34 PM2/23/2016 12:00:00 AM - 4/21/2016 12:00:00 AMVocational3
Industrial Hydraulic Fund (2020 Fall Term MECT-1320-H1605)5/12/2020 7:34:10 PMThis course teaches the fundamentals of hydraulic systems including components, graphic symbols and basic circuit configurations Automated System-Mecha (MECT This course teaches the fundamentals of hydraulic systems including components, graphic symbols and basic circuit configurations. Students will perform calculations for actuator area in square inches, extension and retraction forces in pounds, pressures in pounds per square inch, and speeds in inches per minute. Students will draw and simulate hydraulic circuits using Automation Studio then connect the real circuit on a functional hydraulic trainer. (4 contact hrs) South Campus.Mechanical & Process Tech SCUndergraduateAutomated System-Mecha (MECT)MECT-1320-H1605Industrial Hydraulic Fund MECT-1320-H16052020 Fall Term; M W 4:00 PM - 5:55 PM; M W 4:00 PM - 5:55 PM8/17/2020 12:00:00 AM - 12/12/2020 12:00:00 AMVocational, DO NOT USE-Applied Tech3
Industrial Hydraulic Fund (2020 Fall Term MECT-1320-H1602)5/12/2020 7:34:10 PMThis course teaches the fundamentals of hydraulic systems including components, graphic symbols and basic circuit configurations Automated System-Mecha (MECT This course teaches the fundamentals of hydraulic systems including components, graphic symbols and basic circuit configurations. Students will perform calculations for actuator area in square inches, extension and retraction forces in pounds, pressures in pounds per square inch, and speeds in inches per minute. Students will draw and simulate hydraulic circuits using Automation Studio then connect the real circuit on a functional hydraulic trainer. (4 contact hrs) South Campus.Mechanical & Process Tech SCUndergraduateAutomated System-Mecha (MECT)MECT-1320-H1602Industrial Hydraulic Fund MECT-1320-H16022020 Fall Term; T TH 8:00 AM - 9:55 AM; TH 8:00 AM - 9:55 AM8/17/2020 12:00:00 AM - 12/12/2020 12:00:00 AMVocational, DO NOT USE-Applied Tech3
Pneumatics Technology Fund (2020 Fall Term MECT-1310-H1602)5/12/2020 7:34:10 PMThis course teaches the fundamentals of pneumatic systems including components, graphic symbols and basic circuit configurations Automated System-Mecha (MECT This course teaches the fundamentals of pneumatic systems including components, graphic symbols and basic circuit configurations. Students will perform calculations for actuator area, compressor sizing, conductor sizing, gas laws, air preparation, cooling, and storage of air. Students will draw and simulate pneumatic circuits using Automation Studio then connect the real circuit on a functional pneumatic trainer. (4 contact hrs) South Campus.Mechanical & Process Tech SCUndergraduateAutomated System-Mecha (MECT)MECT-1310-H1602Pneumatics Technology Fund MECT-1310-H16022020 Fall Term; M W 8:00 AM - 9:55 AM; M W 8:00 AM - 9:55 AM8/17/2020 12:00:00 AM - 12/12/2020 12:00:00 AMVocational, DO NOT USE-Applied Tech3
Industrial Hydraulic Fund (2019 Fall Term MECT-1320-S1604)3/1/2019 8:33:05 PMThis course teaches the fundamentals of hydraulic systems including components, graphic symbols and basic circuit configurations Students will perform calculations for actuator This course teaches the fundamentals of hydraulic systems including components, graphic symbols and basic circuit configurations. Students will perform calculations for actuator area in square inches, extension and retraction forces in pounds, pressures in pounds per square inch, and speeds in inches per minute. Students will draw and simulate hydraulic circuits using Automation Studio then connect the real circuit on a functional hydraulic trainer. (4 contact hrs) South Campus.Mechanical & Process Tech SCUndergraduateAutomated Systems-MechatronicsMECT-1320-S1604Industrial Hydraulic Fund MECT-1320-S16042019 Fall TermTH 12:00 PM - 3:55 PM; TH 12:00 PM - 3:55 PM8/22/2019 12:00:00 AM - 12/12/2019 12:00:00 AM3